Custom Zipper Puller

Custom Metal Zipper Pullers — Your Logo, Die-Cast
The zipper puller is the smallest piece of branding on a bag and one of the most handled. We die-cast custom pullers in zinc alloy — engraved, embossed, or enamel-filled with your logo — and match them to standard slider types or to your own zipper specification. A puller mould is one of the smallest and quickest we cut, which makes it an easy first step into custom hardware.
Styles and Attachments

Die-cast logo pullers — your mark raised, recessed, or enamel-filled. Logo depth matters: too shallow and it disappears under plating, too deep and it collects dirt. We aim for 0.2–0.4 mm relief, which stays legible after plating.
Enamel-filled pullers — colour-filled logos for brand collections. Enamel is matched to your Pantone reference and checked under D65 light.
Slider-integrated pullers — where puller and slider are a single piece, for a cleaner look on premium bags.

Attachment options: cord loop, donut (inverted slider), or direct link. The attachment is where pullers fail — a stiff link works loose after a few hundred pulls. We test pull-off force, not just appearance.
Logo Quality: What We Check

Legibility after plating — approved with a physical sample, not from a rendering. Plating builds up on edges and can soften fine text.
Enamel colour consistency — matched to a retained sample, batch to batch.
Pull-off strength — the link point is cycle-tested so the puller does not part company with the slider in your customer’s hands.

From Artwork to Bulk
Send your logo as a vector file or even a rough sketch — we return free 3D artwork for approval before any tooling is cut. Mould making takes about 15 days, PP samples ship in 3 days, and bulk production runs 20–25 days. Plating options include light gold, matte gold, antique brass, nickel-free silver, and gunmetal, all passing 24 / 48 / 72-hour CASS salt-spray testing. For the full tooling process, see our custom mould-making guide.
Send your logo file today — quotation within 30 minutes, 3D drawing within 24 hours.