What is the effect on the performance of the engraved round metal logo hardness electrophoresis lattice frame?-A
For Engraved Round Metal Logo, the hardness, electrophoresis and latticework processes have the following effects on its performance:
Hardness of electrophoretic lattice frame of engraved round metal logo-B
Fourth.hardness test methods and standardsCommonly used test methodsPencil hardness test: According to GB/T 6739 standard, use a pencil of known hardness to scratch at an angle of 45°, and take the highest hardness value without scratch as the result.Vickers hardness (HV): for thin coatings (<50μm), the hardness value is calculated by the diagonal length of the indentation.Knoop hardness (HK): more accurate hardness measurement of small areas, suitable for localised hardening treatments.Standard referencesAutomotive industry standards (e.g. GMW 14872) require electrophoretic coatings to have a pencil hardness of ≥3H and a scratch resistance (under 500g load) of ≤3mm scratch width. Industrial equipment standards may be more stringent, e.g. HV ≥ 200. Fifth.hardness performance in practical applicationsScratch resistanceHardness and scratch resistance are not linearly related. For example, a coating with HV300 may be scratch-free under a force of 5N, but a coating with HV250 may perform better with the addition of a lubricant (e.g. silicone oil).Environmental AdaptabilityHigh temperature and high humidity environments (e.g. 85°C/85%RH) may cause the coating to soften and the hardness to drop by 20-30%. Long-term hardness stability needs to be verified by ageing tests.Sixth.recommendations and directions for optimisationProcess optimisationAdjust the pH (e.g. 5.5-6.5) and conductivity (1000-1500μS/cm) of the electrophoresis solution to improve the densification of the coating.Adopt UV curing technology for the lattice layer, which can shorten the curing time to within 10 seconds and increase the hardness by 15%-20%.Material SelectionFor scenes requiring high hardness (e.g. outdoor signage), a combination of stainless steel substrate + epoxy electrophoresis + two-component polyurethane lattice frame is recommended.For lightweight requirements, aluminium alloy substrate can replace part of the electrophoresis layer function by anodic oxidation pretreatment (hardness HV300-400).Quality ControlSpot check coating thickness (e.g. using eddy current thickness gauge) and hardness per batch to ensure compliance with standards.Establish a correlation database between hardness and weathering and…
Thickness of electrophoretic lattice frame with engraved round metal logo
There is no set standard value for the thickness of the electrophoretic lath (usually referred to as the electrophoretic coating or electrophoretic paint layer) for Engraved Round Metal Logo as it depends on a number of factors including but not limited to the product requirements, the environment in which it is to be used, the parameters of the electrophoretic process, and the characteristics of the material. However, a discussion of possible thickness ranges can be made based on industry practices and the general characteristics of electrophoretic coatings. First.general range of electrophoretic coating thicknessThe thickness of an electrophoretic coating can usually be controlled by adjusting the electrophoretic process parameters (e.g. voltage, time, coating concentration, etc.). In industrial applications, the thickness of electrophoretic coatings can vary from a few microns to tens of microns. For applications requiring higher corrosion and abrasion resistance, the coating thickness may be on the thicker side. Second.factors affecting the thickness of electrophoretic coatingsProduct requirements: Different products require different coating thicknesses. For example, some high-end metal logos may require a thicker coating to provide better protection and decoration.Usage environment: If the logo will be used outdoors or in harsh environments, a thicker coating may be required to resist corrosion and abrasion.Electrophoresis Process Parameters: Parameters such as voltage, time, and paint concentration all affect the thickness of the coating. By adjusting these parameters, the thickness of the coating can be precisely controlled.Material properties: The material and surface condition of the substrate also affect the adhesion and thickness of the coating. For example, a substrate with a rough surface may require a thicker coating for complete coverage. Third.recommendations and opinionsFor Engraved Round Metal Logos: As they are typically used for decorative and signage purposes, the coating thickness should be sufficient to provide a good appearance and some protection, but not…
Difference between electrophoretic paint and regular paint of brand tag-A
Brand tag electrophoresis paint and ordinary paint in the process principle, coating effect, environmental performance, application scenarios, there are significant differences, the following is a specific analysis: First, the process principle and operation modeElectrophoretic paintProcess principle: based on electrophoretic coating technology, using electric field to make charged paint particles deposited on the surface of the workpiece to form a uniform coating.Operation mode: the workpiece needs to be immersed in the electrophoresis tank liquid, and the automated coating is realized through DC electric field, which is complicated but controllable.Ordinary PaintProcess Principle: The paint is covered on the surface of the workpiece by physical means such as spraying or brushing.Operation mode: rely on manual or simple equipment to complete, low threshold for operation but easily affected by human factors.Second, the coating effect and performance differencesCoating uniformityElectrophoretic paint: the coating thickness is uniform, suitable for complex structure workpieces, good coverage of edges, gaps and other parts.Ordinary paint: the coating thickness is easily affected by operation methods, and the complex structure workpiece is prone to problems such as hanging and uneven thickness.Corrosion resistanceElectrophoretic paint: Dense coating, excellent resistance to salt spray and chemicals, suitable for harsh environments.Ordinary paint: weak corrosion resistance, need to cooperate with primer or increase the thickness of coating to enhance the protective ability.AdhesionElectrophoretic paint: strong adhesion to metal substrate, outstanding impact resistance and bending resistance.Ordinary paint: adhesion is greatly affected by the treatment of substrate and construction conditions, and the surface cleanliness needs to be strictly controlled. Third.environmental protection and safety performanceElectrophoretic paintEnvironmental protection: water as solvent, low VOCs emission, in line with environmental regulations.Safety: no flammable and explosive risk, safe and controllable production environment.Ordinary PaintEnvironmental protection: solvent-based paints have high VOCs content and need to be equipped with waste gas treatment equipment.Safety: flammable and explosive, need to strictly manage…
How to make sure that the brand tag of the mold opening is the same as the customer’s request?-A
During the molding process, determining that the Brand tag is consistent with the customer’s requirements is a critical part of ensuring product quality and meeting the customer’s needs. The following is a detailed description of how to determine the Brand tag and customer requirements from a variety of aspects of the method: First. define customer requirements and specificationsDetailed communication: in-depth communication with the customer to understand the specific requirements of the Brand tag, including size, material, color, font, pattern, location and any special process (such as hot stamping, embossing, UV printing, etc.).Written confirmation: Organize the customer’s requirements into a written document, and ask the customer to sign to confirm, as the basis for subsequent production and inspection.Second, design review and confirmationPreliminary design: According to customer requirements, the design department should produce a preliminary design of Brand tag, including graphics, text and color and other elements.Customer review: Submit the preliminary design to the customer for review to ensure that the design meets their brand image and style requirements. If necessary, revisions are made based on client feedback.Final Confirmation: After several times of communication and modification, obtain the client’s final confirmation of the Brand tag design. Third.material selection and confirmationMaterial Matching: Choose the right material according to customer’s requirements, such as paper, plastic, metal, etc., and make sure the quality, thickness, gloss and other characteristics of the material meet the design requirements.Sample Confirmation: Before formal production, make Brand tag samples and submit them to customers for confirmation. Customers should check the material, color and printing effect of the samples.
Thickness requirements for spraying racks of band tag
“Brand Tag” is not a well known standardized brand and the thickness requirements for spray frames (or spray related equipment/materials) may vary depending on the specific product model, application area and technical specifications. The following are general notes and recommendations: First.factors affecting the thickness of spray frames Type of material: The substrate material of the spray frame (e.g. metal, plastic) and its surface treatment (e.g. plating, coating) have a direct influence on the thickness. For example, the thickness of galvanized or anodized coatings usually ranges from a few microns to several tens of microns. Functional requirements: Corrosion resistance: thicker coatings are required to enhance corrosion resistance. Conductivity: Excessively thick coatings may reduce the efficiency of electrical conductivity and the thickness needs to be optimized. Mechanical strength: Highly loaded parts may require thicker support structures. Industry Standards: Different industries (e.g., automotive, electronics, construction) have specific requirements for the thickness of spray gun holders. For example, the automotive industry may require a coating thickness between 15-25μm to ensure corrosion resistance and adhesion. Second.how to determine the specific thickness Consult the technical manual: Contact the official Brand Tag or authorized distributor to obtain the product technical specifications (Datasheet), in which the thickness parameters should be clearly indicated. Consult technical support: If the manual does not provide detailed information, you can contact the brand’s technical support team directly, providing specific application scenarios (e.g., material of the workpiece, use of the environment), in order to obtain customized advice. Refer to industry standards: If the brand does not specify, you can refer to the following standards: ISO 1461 (galvanized metal thickness) ASTM B117 (salt spray test standard, indirectly related to the coating thickness) IPC-A-610 (coating thickness requirements for the electronics industry) Third.notes Thickness and cost: The thicker the coating, the higher the cost, and the need…
Paint Metal Bag Label Letters Logo
Place of origin : Guangdong, China Style: FASHION, Luxury, TRENDY, PROFESSIONAL, user-friendly, Waterproof Application: Decoration, accessories, Purse, Handbag, bag accessories, Suitcase, luggage accessories, Backpack feature: Eco-Friendly, Durable, Waterproof, HIGH QUALITY, Washable, Recyclable, Fashionable, Colorful, Nickel-Free Product name: Paint Metal Bag Label Letters Logo Samples : Sample Availble Usage: Handbags, Bags, Purses, Clothes, Hats, Shoes 3D Drawing: Provide a 3D drawing for confirmation before production Plating : Hanging Plated Quality: High Level
Sticky
Separated Letters Gold Metal Logos
Place of origin : Guangdong, China Style: FASHION, Luxury, TRENDY, PROFESSIONAL, user-friendly, Waterproof Application: Decoration, accessories, Purse, Handbag, bag accessories, Suitcase, luggage accessories, Backpack feature: Eco-Friendly, Durable, Waterproof, HIGH QUALITY, Washable, Recyclable, Fashionable, Colorful, Nickel-Free Product name: Separated Letters Gold Metal Logos Samples : Sample Availble Usage: Handbags, Bags, Purses, Clothes, Hats, Shoes 3D Drawing: Provide a 3D drawing for confirmation before production Plating : Hanging Plated Quality: High Level
Screw Fix Engraving Metal Logo Label
Place of origin : Guangdong, China Style: FASHION, Luxury, TRENDY, PROFESSIONAL, user-friendly, Waterproof Application: Decoration, accessories, Purse, Handbag, bag accessories, Suitcase, luggage accessories, Backpack feature: Eco-Friendly, Durable, Waterproof, HIGH QUALITY, Washable, Recyclable, Fashionable, Colorful, Nickel-Free Product name: Screw Fix Engraving Metal Logo Label Samples : Sample Availble Usage: Handbags, Bags, Purses, Clothes, Hats, Shoes 3D Drawing: Provide a 3D drawing for confirmation before production Plating : Hanging Plated Quality: High Level
