Description
A die-cast zinc alloy slider buckle sized for 26 mm webbing, finished in shiny gunmetal. The bar is polished before plating, so the strap runs across a smooth edge instead of a casting seam — the reason most sliders start chewing through webbing after a few hundred adjustments.
What Makes the Difference
Bar radius. A sharp inner bar edge cuts webbing fibres on every pull. Ours is rounded and polished to a consistent radius, which is the single change that turns a cheap slider into one that lasts the life of the bag.
Wall thickness under load. Sliders fail when the side walls bow under tension and the webbing slips. We cast this size in a single-cavity tool so wall thickness stays within tolerance across the whole run, not just the first shots.
Plating on the contact faces. Rack plated so the finish reaches the inner bar, where barrel plating thins out and wear shows first.
Specification
- Material: Zinc alloy, die-cast
- Webbing width: 26 mm
- Finish: Shiny gunmetal (rack plated)
- Logo: Customized — embossed, debossed or laser
- MOQ: 500 pcs per colour
- Sample: PP sample in 3 days
- Production: 20–25 days after artwork approval
Testing
Copper accelerated acetic acid salt spray at 24, 48 or 72 hours depending on the market requirement, plus 2000 cycles of alcohol rubber abrasion for colour retention. Nickel-free and lead-free as standard.
Applications
Shoulder bag straps, backpack webbing, luggage compression straps, and adjustable sling straps.
Send your drawing and webbing specification, and we will confirm the fit and unit price within 30 minutes during working hours.
