Thickness requirements for spraying racks of band tag
“Brand Tag” is not a well known standardized brand and the thickness requirements for spray frames (or spray related equipment/materials) may vary depending on the specific product model, application area and technical specifications. The following are general notes and recommendations:
First.factors affecting the thickness of spray frames
Type of material:
The substrate material of the spray frame (e.g. metal, plastic) and its surface treatment (e.g. plating, coating) have a direct influence on the thickness. For example, the thickness of galvanized or anodized coatings usually ranges from a few microns to several tens of microns.
Functional requirements:
Corrosion resistance: thicker coatings are required to enhance corrosion resistance.
Conductivity: Excessively thick coatings may reduce the efficiency of electrical conductivity and the thickness needs to be optimized.
Mechanical strength: Highly loaded parts may require thicker support structures.
Industry Standards:
Different industries (e.g., automotive, electronics, construction) have specific requirements for the thickness of spray gun holders. For example, the automotive industry may require a coating thickness between 15-25μm to ensure corrosion resistance and adhesion.
Second.how to determine the specific thickness
Consult the technical manual:
Contact the official Brand Tag or authorized distributor to obtain the product technical specifications (Datasheet), in which the thickness parameters should be clearly indicated.
Consult technical support:
If the manual does not provide detailed information, you can contact the brand’s technical support team directly, providing specific application scenarios (e.g., material of the workpiece, use of the environment), in order to obtain customized advice.
Refer to industry standards:
If the brand does not specify, you can refer to the following standards:
ISO 1461 (galvanized metal thickness)
ASTM B117 (salt spray test standard, indirectly related to the coating thickness)
IPC-A-610 (coating thickness requirements for the electronics industry)
Third.notes
Thickness and cost: The thicker the coating, the higher the cost, and the need to strike a balance between performance and cost.
Thickness uniformity: spraying needs to ensure that the thickness is uniform, to avoid localized thinning leading to corrosion or too thick to affect the performance.
Inspection methods: Non-destructive inspection can be carried out using a coating thickness gauge (e.g. magnetic induction, eddy current or ultrasonic).
Conclusion
As “Brand Tag” is not a generic brand, the thickness requirements of the spray lacquer frame should be confirmed through official channels. It is advisable to obtain the technical documentation of the product as a matter of priority or to contact the brand directly to obtain accurate data.
